1.High efficiency solar cells with high transmission and textured
glass are delivering high efficiency for modules;
2.Bypass diode minimizes the power drop caused by shade;
3.Tempered glass, EVA resin, and weatherproof film, plus aluminum
frame for extended outdoor use;
4.Modules independently tested to ensure conformance with
and regulatory standards;
5. Manufacturing facility certified to ISO9001 quality management
1.Junction Box in proof-water with TUV Certificate
2.Bypass Diode Rated 45V&15A
3.Solar Cable & Connector: 4m² MC 4connector with TUV Certificate
4.Toughed Glass: The glass is super white cloth grain of toughened
glass , the thickness of 3.2mm , the solar cell spectral response
range of wavelengths (320-1100 nm), light transmittance over 91% ,
Ultraviolet light radiation , light transmittance is not falling
.Toughened glass is made of components can withstand 25 mm in
diameter of hockey hit at a speed of 23 m/s.
5.EVA: 0.5 mm thickness with high quality EVA film as sealant of
solar cell and and the connection between the glass, TPT agent.
With high light transmittance and anti-aging ability. Solar cell
encapsulation of EVA film after curing performance requirements:
Light transmittance is greater than 91% ; Crosslinking degree is
during from 70 to 90% ; Peel strength (N/cm), glass/film is more
than 30 ; TPT/film is more than 15 ; Temperature resistance is from
- 40° C to 85° C.
6.TPT BackSheet: the back of the solar panel, ageing resistance ,
corrosion resistance , resistance to ultraviolet radiation,
airtight, etc. Basic requirements.
7.Frame: aluminum alloy frame with high intensit , mechanical shock
resistance ability.Strong, lightweight aluminum frame design with
reinforced sealing and load hold to prevent freezing and warping,
and stand against high wind.